Shop and showroom
Let the facade follow your in-store campaign. A new banner makes room for sales, seasonal products and new collections.
New message. Same facade.
SpiderSystem makes facade banner changes simple. Lower the banner, change your artwork and raise it again.
SpiderSystem on a facadeVisuel Print
The actual SpiderSystem mounting
The banner is connected with black rubber straps and four corner brackets. The cable runs to a control box on the left or right of the banner. These original product photos show the actual system.
Change your message from the ground
The cable and control box let you lower the banner when it is time to change the artwork.
One facade. Many campaigns.
Keep the mounting system and change banners for a season, sale or new message.
Adapted to your wall
Start with the dimensions. View the banner size and placement before continuing.
Configure your SpiderSystem.
Wall, banner and position together. The drawing follows your choices.
Measurement help
System height is measured from the ground to the top mounting point. Box height is the control box height above the ground.
Wide banners need 70 cm on each side and 30 cm above and below. Other formats need 50 cm on every side.
Left and right when facing the facade.
Your complete configuration.
Check your dimensions and tell us who to contact about the solution.
1–10,000 identical systems
Examples:
Visuel PrintBannerCableMounting clearance
- Banner area
- —
- Overall mounting size
- —
- Clearance below mounting
- —
The drawing is indicative. Surface, fixings and final installation are confirmed with Visuel Print.
A permanent place for changing messages.
Multiple locations
Use the same artwork across shops and adapt the format to each facade.
Larger facades
Give your message a clear place on the building. The configurator helps you compare wall and banner proportions.
From measuring to new artwork.
A good result starts with the right dimensions and a suitable surface. Here are the key points to discuss.
Watch the video guides belowHow to measure the facade
Measure the available width and height. Note doors, windows, downpipes and other obstacles. Take a facade photo and mark the planned banner location.
How installation is planned
Confirm the wall material, fixings and access to the box. The configurator shows mounting clearance; it does not replace an assessment of the facade and fixings.
How to change the banner
Lower the banner using the system cable, replace the artwork and raise the banner again. Follow the approved instructions for your installation.
Watch it step by step
Measure your facade
See how to measure the facade and allow space for the banner and mounting system.
Watch on YouTubeInstall the system
Follow the assembly of the mounting system, cable and control box.
Watch on YouTubeBefore you choose.
How large can the banner be?
Visuel Print’s existing product description specifies up to 20 m² and a maximum width of 6 m. The configurator also checks mounting clearance and the relationship between width and height.
Can I order a replacement banner?
Contact Visuel Print with your existing banner dimensions and preferably a photo of the mounting system to confirm the appropriate solution.
Is the drawing ready for production?
The drawing is a starting point for discussion. Visuel Print must confirm dimensions, surface, fixings, banner specification and final installation before starting an order.
A facade you want to make more visible?
Bring your dimensions and ideas so we can explore how SpiderSystem can fit.